Countertop Cabinet

Countertop cabinets are Jetstream enabled devices used to transport, protect, and track field or mobile inventory. These devices support most Jetstream commands and events, but do not include temperature sensors or secured access like larger enclosures.

Name Description Data Type Min Max Default
AggregateEventScanCount Number of times to scan after product is added/removed and door is closed. Int 1 100 2
AggregateEventScanDelay Number of seconds to wait between scans. Int 1 60 1
AggregateEventScanTime Time in seconds for each scan Int 1 300 10
AntennaTxPower The dB transmit power of all of the antennas. Int 10 23 23
CommandPollInterval The number of minutes between polling for device commands in Jetstream. Int 0 600 60
CommsReboot Number of minutes after the system loses communication that it will automatically reboot. Int 10 1440 230
CommsReconnectInterval Time in seconds to wait before attempting to communicate with Jetstream if there were any communication problems. Int 1 300 10
CommsTimeout Time in seconds to wait for a reply from Jetstream after sending an event or command response. Int 1 300 60
DNS The DNS to be used in a static LAN environment. When set to '0.0.0.0', the DHCP assigned DNS server is used instead. IP Address 0.0.0.0 255.255.255.255 0.0.0.0
DoorOpenTimeLimit Time in seconds that the door can be left open before a DoorAjar alarm is sent. Int 0 3600 300
Gateway The gateway address to be used in a static LAN environment. When set to '0.0.0.0', the DHCP assigned Gateway address is used instead. IP Address 0.0.0.0 255.255.255.255 0.0.0.0
HeartbeatEventInterval The number of minutes between sending a HeartbeatEvent. A setting of 0 will disable HeartbeatEvents. Int 0 600 60
InactivityInterval Time in seconds communications will wait before re-establishing a connection if there is no activity. Int 70 3600 300
IP The IP address to be used in a static LAN environment. When set to '0.0.0.0', the DHCP assigned IP address is used instead. IP Address 0.0.0.0 255.255.255.255 0.0.0.0
JetstreamDeviceUrl The URL to which the cabinet sends Jetstream messages. String - - us-device.tersosolutions.com
JetstreamWebsocketAppEndpoint The Jetstream resource used to connect for WebSocket communications. Using '#' will disable WebSocket communications. String - - /dwsliveconnection.ashx
LogEntryLevel The verbosity of the logs sent by the cabinet.
  • Off
  • Error
  • Warning
  • Information
  • Verbose
String - - Error
LogFileLevel The verbosity of the logs saved locally on the cabinet.
  • Off
  • Error
  • Warning
  • Information
  • Verbose
  • Trace
  • Debug
String - - Debug
ObjectEventHour The hour to perform the daily system scan as well as other system checks. A setting of -1 will disable ObjectEvents. Int -1 23 0
ObjectEventScanCount The number of times to scan during a GetEPCListCommand or during the daily system scan. Int 1 100 2
ObjectEventScanDelay Number of seconds the cabinet should wait between scans. Int 1 60 1
ObjectEventScanTime The time in seconds for each scan during a GetEPCListCommand or during the daily system scan. Int 1 300 5
ReaderLogEntryOnFailure Generate a LogEntryEvent when communications to the internal RFID reader fails. Bool 0 1 0
ReaderNumAntennas The number of antennas the cabinet is using. Int 1 4 4
SecureSocket Use secure communications over HTTPS for the cabinet. Bool 0 1 1
Subnet The subnet address to be used in a static LAN environment. When set to '0.0.0.0', the DHCP assigned subnet is used instead. IP Address 0.0.0.0 255.255.255.255 0.0.0.0

The list below are some common, potential LogEntryEvents a cabinet may send in. However, not all possible LogEntryEvents are listed in this table. The LogEntryLevel in use determines which LogEntryEvents are sent to Jetstream.

Name Description
CorruptFlash CorruptFlash occurs when the event queue on the device cannot be read due to a memory failure.
DoorOpen DoorOpen occurs when the door is left open for greater than the DoorOpenTimeLimit.
DoorOpenRestore DoorOpenRestore occurs when the countertop cabinet's door is closed after a DoorOpen scenario.
DoorSensorFailure DoorSensorFailure occurs when the countertop cabinet believes there is a problem with the door sensor.
FirmwareInfo FirmwareInfo occurs whenever the countertop cabinet is started up.
LowFlashMemory LowFlashMemory occurs when the countertop cabinet has less than 25% memory.
LowMemory LowMemory occurs when the countertop cabinet has less than 25% memory. This event will be sent every hour until the device reboots. Reboot occurs automatically if memory drops to 10%.
NewFirmwareDownloadError NewFirmwareDownloadError occurs when a request to upgrade firmware fails.
ReadException ReadException occurs when there is an issue performing an RFID scan.
ScanInterruptionAlarm ScanInterruptionAlarm occurs when someone interrupts a scan by opening the door.
Startup Startup occurs whenever the countertop cabinet is started up.